Skip to content

Overview of GPRS Scanning and NDT

gpr scanning

GRP Scanning, or Ground Penetration Radiography, is a very effective method of acquiring quality information on underground constructions. With this technology, inspectors and engineers are able to access underground concrete structures to identify flaws and faulty connections. This method has enabled numerous companies to create superior structures by identifying weak spots before construction. In addition, this innovative technology allows workers to have a more accurate estimate of the amount of concrete they need to remove.


Concrete scanning services Melbourne are one of the best gpr scanning providers. There are many benefits associated with GRP scanning including the identification of weak spots, defects and other defects in concrete that cannot be seen using traditional imaging techniques. Another benefit of using GRP technology is the ability to view embedded objects. Typically, inspectors will use visual inspection methods such as visual inspection camera systems, or hot bore cameras to inspect large constructions or large sections of concrete. However, these imaging equipment are not capable of detecting all the tiny little defects and problems that often go unnoticed. Because of this, many construction managers have started utilizing GPRS technology to detect all the defects in concrete. Rebar x ray services help you detect steel below concrete.


The major use of this GPRS scanner is to locate all possible sources of leakage. For instance, if there are cracks at a particular spot where pipes or cables are being laid down then all you have to do is put the appropriate GPRS antennae near the area and start the scanning. The emitted waves will penetrate the earth's surface and will be able to identify the exact location of the leakage. On the other hand, if you are planning to dig a hole within the basement of your house then you will first need to set up a borehole in the exact location where you want the pipe or cable to pass through.

READ  What Are Sistering Floor Joists?


Melbourne GPR scanning is gaining traction. As soon as the signal produced by the GPRS antenna is received by the computer, it can be interpreted by the software program of the handheld tool used for GPRS scanning and it will tell you the exact distance, diameter and thickness of the concrete being penetrated. This information is then displayed in details on a LCD screen, which you will find easy to comprehend. Moreover, the readings obtained from this depth penetration tool can determine the quantity of concrete that has to be removed. This is particularly important when you are dealing with difficult and thick concrete which may take a few days or even months to remove. At the same time, GPRS technology can also determine the approximate length of time needed for the process of excavation and boring to be able to complete the job.


It must be noted however that GPRS surveying and NDT is not only used to detect pipeline defects and pipe defects but it can also be used in identifying soil voids and exposed cavities below the surface. The primary use of GPRS surveying and NDT is to inspect for buried constructions which are often left undiscovered by manpower and by contractors as they are usually placed above the ground level. In addition, GPRS can also be utilized to locate problematic areas where a pipeline or a drainage system could be problematic. For instance, if a pipeline is located below a water table, GPRS scanning can be employed to locate places where water could potentially flow into. In this case, the results of the scan will provide estimations regarding the volume of water that would be lost should damages occur due to pipe blockage.

READ  Can You Add Decals To Your Car?


Most of the equipment used for GPRS scanning and NDT is automatic, meaning it does not require manual labor or assistance from operators. This makes it more suitable for tasks that do not require much movement and for which there is little or no need for manual intervention. In addition, the automatic machines have the advantage over manual tools as they do not require any exposure to harmful gases. As a result, GPRS imaging and NDT can be performed continuously without the risk of encountering any safety risks.